Pressure Washing for Driveways, Patios & Hard Surfaces in Redditch, Worcester & Birmingham
Block paving, concrete, tarmac, resin, sandstone and commercial hard standing stripped of black spot, algae and years of ground-in dirt, with optional re-sanding and sealing so the surface stays cleaner for longer.
10 years in the trade · £5,000,000 public liability insurance · 100% recommended on Facebook (11 reviews)
10 years
In the exterior cleaning trade
£5,000,000
Public liability insurance
2 hours
Typical enquiry response
24 hours
To a firm, fixed quote
Checkatrade
& SoftWash UK member
Service overview
What Pressure Washing Actually Involves
Pressure washing is the mechanical removal of built-up dirt, algae, black spot and moss from hard surfaces using controlled water pressure matched to the material, block paving, concrete, tarmac, resin-bound driveways, natural sandstone and Indian stone, and commercial hard standing all need a different approach to avoid etching, jetwashing sand out of joints, or driving dirt further into a porous surface.
James runs every job personally, working the surface in sections so nothing is left half-cleaned or streaked. Block paving gets swept and jointed properly rather than blasted and left; resin and porous surfaces are washed at reduced pressure to protect the binder; concrete and tarmac can take a firmer pass where the surface allows it. The equipment and pressure are chosen for what is underfoot, not applied the same way everywhere.
Where jointing sand has washed or blown out of block paving, re-sanding is available as an add-on once the surface is clean and dry. Sealing is also available across all surface types once cleaned, to slow down how quickly dirt and algae take hold again.
Who this is for
- Homeowners with driveways or patios covered in black spot, moss or general grime
- Anyone re-sanding block paving where joints have washed out or gone green
- Sellers wanting the drive and path to look right before viewings and photos
- Landlords and letting agents maintaining external areas between tenancies
- Commercial premises with car parks, forecourts or hard standing: RAMS on request
- Anyone wanting a surface sealed straight after cleaning to keep it looking newer for longer
Left untreated
What Happens If You Leave A Dirty Driveway Or Patio
Algae and lichen on a patio or path are not just cosmetic. They hold moisture against the surface, and on natural stone or concrete that moisture works into the pores and freezes in winter, which is what causes flaking and pitting over successive years. On block paving, moss and weed growth in the joints lifts blocks slightly and lets more water and seed in behind them, which is how a small green patch becomes uneven paving within a couple of seasons.
The second issue is grip. Algae on a driveway, path or step is genuinely slippery when wet, and that risk sits at your front door or the route to your bins, exactly where visitors and delivery drivers walk. It is one of the most common reasons people finally get a drive cleaned: not the look of it, but a near-miss on a wet morning.
Cost-wise, a driveway or patio that is cleaned and, where relevant, re-sanded and sealed on a maintenance cycle stays looking presentable and stays safer underfoot, at a fraction of the cost of replacing lifted block paving or a cracked, spalled patio slab further down the line.
Mistakes that cost people money
- Using full pressure on resin-bound or porous surfaces, which can strip the binder or drive dirt deeper in
- Jetwashing block paving without re-sanding afterwards, leaving joints open to weed seed and movement
- Cleaning without sealing where the surface would benefit, so algae returns within weeks
- Ignoring slippery patios and paths until someone has a fall
- Using bleach or unlicensed chemicals that scorch planting and stain the surface itself
- Booking on price alone from someone with no public liability cover working near your home
Our process
The Pressure Washing Process
01
Inspection & Quote
The surface type, condition, jointing and area are assessed from photos, a site visit, or Google Earth on larger commercial areas, so the quote reflects what is actually there rather than a guess. You get a firm, fixed price within 24 hours.
02
Preparation
Vehicles, furniture and planting are moved or protected, drains are checked, and any weed growth in joints is treated ahead of washing so it does not just get spread around by the water.
03
Pressure Washing
The surface is worked in sections at a pressure suited to the material, firmer on concrete and tarmac, reduced on resin and natural stone, lifting black spot, algae, moss and general grime without gouging joints or eroding the surface.
04
Re-Sanding (Where Needed)
On block paving where joints have washed or blown out, kiln-dried sand is swept in and settled once the surface has dried, restoring stability to the blocks and closing off the gaps that weeds and moss use to establish.
05
Sealing (Optional) & Sign-Off
Sealing is available across all surface types once cleaned and dry, to slow down how quickly algae and staining return. The area is walked with you at the end, and if you are not 100% happy, we come back and put it right free of charge.
The benefits
What You Get From A Properly Cleaned Hard Surface
A surface that is genuinely safer
Removing algae and moss takes the slip risk off your driveway, path and steps, not just the colour.
Block paving that stays put
Re-sanding after cleaning restores stability to blocks and shuts down the gaps weeds and moss use to get started.
Slower regrowth with sealing
Sealing after cleaning means the surface takes longer to go green again, so the gap between cleans stretches out.
The right pressure for the material
Resin, natural stone, block paving, concrete and tarmac are all treated differently, so you get a clean surface rather than a damaged one.
Fully insured work at your front door
£5,000,000 public liability insurance covers every visit, and RAMS are issued on request for commercial sites.
A drive or patio that lifts the whole property
The driveway and path are usually the first thing anyone sees, cleaning them changes how the whole frontage reads.
In detail
Surfaces & Situations We Cover
Pressure washing needs different handling depending on the material and how it is used. Here is how we approach the surfaces we see most across Redditch, Alcester, Evesham, Bromsgrove, Droitwich, Worcester, Solihull and Birmingham.
Block paving driveways
+
The most common driveway surface locally, and the one most affected by joint sand loss. Washed at a pressure that lifts dirt without blasting sand out of sound joints, then re-sanded where joints have already opened up, restoring both the look and the stability of the paving.
Concrete and tarmac
+
Concrete and tarmac tolerate firmer pressure than block paving or natural stone, which makes them quicker to bring back from heavy black spot and oil staining. Care is still taken around expansion joints and any cracking, which is flagged rather than pressure-washed harder in an attempt to hide it.
Resin-bound and resin-bonded surfaces
+
Resin surfaces are washed at reduced pressure to protect the binder holding the aggregate in place. Getting this wrong strips resin and loosens stone, so pressure is kept conservative and the surface is worked more slowly instead.
Natural stone and Indian sandstone patios
+
Porous natural stone holds algae and lichen in its surface texture more readily than manufactured paving. Cleaned at a pressure that lifts growth without eroding the stone face, and a good candidate for sealing afterwards to slow the regrowth cycle.
Paths, steps and pool surrounds
+
These are the surfaces where slip risk matters most, being used barefoot or in wet conditions. Cleaned with particular attention to grip, and often the first area cleared during a wider driveway or patio job.
Commercial hard standing and forecourts
+
Car parks, loading areas and forecourts are quoted from a site visit or Google Earth for larger areas, scheduled around opening hours where needed, and covered by RAMS issued on request. Letting agents and property managers are welcome, and repeat maintenance schedules can be arranged.
Questions
Pressure Washing: Your Questions Answered
Anything not covered here, call James on 07511 580040 , the enquiry line is 24/7 enquiry line.
How much does pressure washing cost in Redditch?
Every driveway, patio or hard standing is priced individually based on surface type, area and condition. Send photos or a postcode and you will have a response within 2 hours and a firm, fixed quote within 24. Larger commercial areas are measured with a site visit or Google Earth before quoting.
How long does pressure washing take?
Most residential driveways and patios are completed in a single visit. Larger areas, re-sanding, or sealing added on the same day may extend the job; you will know the expected time before you book, not on the day.
Will pressure washing damage my block paving or resin drive?
Not when the pressure is matched to the surface. Resin and natural stone are washed at reduced pressure, block paving is swept and re-sanded where needed rather than left with open joints, and concrete or tarmac can take a firmer pass. Every job is £5,000,000 public liability insured.
Do you re-sand block paving after cleaning?
Yes, where joints have washed out or gone green, re-sanding is offered as part of the job once the surface has been cleaned and allowed to dry properly.
Can you seal my driveway or patio after washing?
Yes, sealing is available on all surface types once cleaned and dry, and it slows down how quickly algae, black spot and general staining come back.
Is there a guarantee on pressure washing?
Pressure washing itself does not carry a fixed-term guarantee, but every job is covered by our standard policy: if you are not 100% happy with the result, we come back and put it right free of charge.
How long will my driveway or patio stay clean?
That depends on exposure, drainage, tree cover and whether the surface is sealed afterwards. Shaded, north-facing or overhung areas green up faster than open, sunny ones, which is why sealing and a regular maintenance cycle both help extend the gap between cleans.
Do you clean commercial car parks and forecourts?
Yes. Commercial hard standing, car parks and forecourts are quoted from a site visit or Google Earth, RAMS are issued on request, and work can be scheduled around business hours. Letting agents and property managers are welcome.
How quickly can you come out?
Enquiries are answered within 2 hours and quotes issued within 24 hours. Our enquiry line is open 24/7: call, message or use the form and James will come back to you personally.
Do you cover areas outside Redditch?
Yes: Redditch, Alcester, Evesham, Bromsgrove, Droitwich, Worcester, Solihull and Birmingham are all covered, domestic and commercial. If you are just outside that list, ask; it is usually still workable.
Where we work
Pressure Washing Across Redditch & The West Midlands
- Pressure Washing in Redditch
- Pressure Washing in Alcester
- Pressure Washing in Evesham
- Pressure Washing in Bromsgrove
- Pressure Washing in Droitwich
- Pressure Washing in Worcester
- Pressure Washing in Solihull
- Pressure Washing in Birmingham
Based in Redditch, covering Worcestershire and the West Midlands. See every area we cover for exterior cleaning.
Related services
Often Booked Together
Patio Restoration
Old jointing compound removed and replaced with premium Nexus Titan compound, carrying an 8-year guarantee.
Render Cleaning
Soft wash process using biocide to lift algae and staining without damaging the render. 2-year guarantee.
Gutter Clearance
Gutters cleared up to 40 feet from the ground, with fascia cleaning included using the reach and wash system.
Request an estimate
Get Your Driveway Or Patio Looking Right Again
Send a photo or your postcode and you will have a reply within 2 hours and a firm quote within 24. Re-sanding and sealing are available on request, and every job is covered by our free re-clean policy if you are not 100% happy.
- £5,000,000 public liability insurance
- Free re-clean if you are not 100% happy
- Reply within 2 hours, firm quote within 24